Specs

Product Name

Zenmuse S1

Weight

760±10 g

Dimensions

125×152×171 mm (L×W×H)

Rated Power

68 W

Supported Aircraft

Matrice 300 RTK (requires DJI RC Plus)
Matrice 350 RTK

Shell Temperature

<50° C (122° F, plastic shell)

^{Measured in a laboratory environment at an ambient temperature of 25° C (77° F) with the Zenmuse S1 installed on the aircraft.}

Ingress Protection Rating

IP54

^{Under controlled laboratory conditions, it can achieve an IP54 protection rating by IEC60529 standards. The IP rating is not permanently effective and may decrease due to product wear and tear.}

Eye Safety Class

IEC 62471: Risk Group 1

Environment

Operating Temperature

-20° to 40° C (-4° to 104° F)

Storage Temperature

-20° to 60° C (-4° to 140° F)

Gimbal

Stabilization System

3-axis (tilt, roll, pan)

Operation Mode

Follow / Free / Re-center

Angular Vibration Range

Hover: ±0.01°
Flight: ±0.02°

Mounting

Detachable DJI SKYPORT

Mechanical Range

Tilt: -129° to +73°
Roll: ±55.8°
Pan: ±327°

^{Structural limit, not controllable range.}

Max Control Speed

Tilt: -120° to +60°
Pan: ±320°

Illuminance

Maximum Central Illuminance

35 lux @100 m (Both On mode)

^{Measured in a laboratory environment at an ambient temperature of 25° C (77° F) with the Zenmuse S1 installed on the aircraft.}

Low Beam Central Illuminance

13 lux @100 m (Low Beam mode)

^{Measured in a laboratory environment at an ambient temperature of 25° C (77° F) with the Zenmuse S1 installed on the aircraft.}

High Beam Central Illuminance

30 lux @100 m (High Beam mode)

^{Measured in a laboratory environment at an ambient temperature of 25° C (77° F) with the Zenmuse S1 installed on the aircraft}

Effective Illumination Angle

15±1° (10% relative illuminance, Low Beam mode and Both On mode)
4±0.5° (10% relative illuminance, High Beam mode)

Typical Color Temperature

6500K typical value (Low Beam mode)
7500K typical value (High Beam mode)

^{Measured in a laboratory environment at an ambient temperature of 25° C (77° F) using an integrating sphere. Actual results may vary slightly due to different experimental conditions, and the final effect is subject to actual use.}

Effective Illumination Distance

500 m (Both On mode)

^{Measured in a laboratory environment at an ambient temperature of 25° C (77° F). Actual conditions may vary slightly due to specific environmental humidity, weather conditions, and other factors. The final effect is subject to actual use.}

Dimming Mode

Analog dimming

Basic Features

Lighting Control

Turning light on/off, brightness adjustment

Strobe Mode

5 Hz strobe

Lighting Mode

Low Beam mode, High Beam mode, Both On mode

Remote Controller Buttons

Can be set for turning the light on/off, brightness adjustment, or lighting mode changes

Gimbal Synchronization

Supports synchronized control with other gimbal-equipped payloads

Special Features

Eye Protection

Automatically limits brightness to 40% when not in flight

Payload Protection

LED, LEP temperature protection, overcurrent protection, and power protection to prevent damage.